Pages

Thursday, September 16, 2010

Samsung Corby Pro GT-B 5310 Flashing Tutorial


What is meant by firmware?


Firmware is a combination of software and hardware. It is a piece of code used to control the phone or electronic devices. It is almost same as operating system in our PC. Manufacture develop firmware for their products and after released they find out the bugs and upgrade the current version.
Each and every mobile phone has a firmware or operating system. And after getting feedback from the consumers they rebuild the firmware with extra features.
Reinstalling the firmware to our device is called flashing. Flashing can be done through network, serial communication, debuggers, third party hardware/software. Mostly mobile phones are flashing through USB ports.

Firmware download

Here I will give you some firmware versions.
Europe
Arabic versions
Other version
B5310XCIL2  part I part II

Mobile Phone Flashing

Flashing Mobile phones we need USB connector, firmware and a program called as loader. This loader is used to install the firmware into mobile phone.

Flashing tutorial for B5310
For Samsung Corby the latest version loader available is multiloader v5.62


Do the following steps


  • Download the appropriate firmware, unzip all files to a folder
  • Charge the phone battery at the most, to flash the firmware because the battery is inserted and the operation takes about 5 minutes so it's better to be safe.
  • Install Samsung cd Kies you find on the phone or visit Samsung, we need for drivers.
  • You can manually put the phone in Boot Mode by removing the battery to shut it down, unplugging the cable Micro USB, replacing the battery and pressing and holding down: low volume, room key (is on the right side down) and key ignition, a screen will appear showing a cell.
  • Connect your phone to your PC (if you use a laptop is better because if unfortunately lacks the power during the flash the phone will be thrown away) and wait until the device is not recognized, I tried on Windows 7 Ultimate x64 so I suppose not there are contraindications to other systems.
  • Remove SIM and memory card from the phone for safety, turn off the phone and connect to PC
  • Open Multiloader 5.62 and select the following items: BRCM2153, Boot Change, Full Download, click on boot and load the boot folder from the folder where you extracted the firmware, follow do the same thing by selecting files AMSS, APPS, RSRC1 , RSRC2 (select the version LOW!), continue with Factory FS, CSC, SHP APA, all other items should be left empty, safe place for a screen shot
  • Click on Port Search on Download and then wait until all files are loaded, do not disconnect the phone for any reason during the flash unless you want to end up with a very expensive paperweight.
ARE NOT RESPONSIBLE if performed incorrectly or not the procedure you should know and for reasons not brick the phone, also lose the guarantee, however, if unfortunately something goes wrong before despair if you experience any of the following problems: the phone is switched on and the initial screen but the system does not load or loads a while and then sometimes it springs to life constantly asking for a millisecond or even pin should see a screen with a phone connected with dots (topped by a reassuring little yellow triangle error ) to a PC, you can manually put the phone in Boot Mode by removing the battery to shut it down, unplugging the cable Micro USB by replacing the battery by pressing and holding down: low volume, room key (is on the right side down) and key ignition, a screen will appear showing a cell at this point reconnect Micro USB flash and try again.


Reference Samsung-firmware.webs.com

83 comments:

  1. Hi Faisal,
    can we get customised firmware's for corby pro???

    ReplyDelete
  2. @Baze Boi

    No, its not an open source code...

    but you can, you should know the internals and coding and also need the development kit

    ReplyDelete
  3. is it ok if we flash frm time to time ..it wont damage the phone will it ?

    and is the warranty still applicable if i flash my corby pro ?

    ReplyDelete
  4. flash yourself and if ny problem occurs you wont get ny warranty!!!...

    all memory read/write has a limit, flashing is nothing erasing old firmware and downloading new firmware into memory...

    ReplyDelete
  5. Top five internet based applications for your Mobile Phone http://bit.ly/cnOnam

    ReplyDelete
  6. BSNL 3G and Samsung Corby Pro http://bit.ly/dBQcwK

    ReplyDelete
  7. nice work...
    do u hav download link to B5310DDJ2
    that version hav call recorder and built in dictionary

    ReplyDelete
  8. http://corbythesaurus.blogspot.com/2010/09/flashing-tutorial-samsung-corby-pro-gt.html

    ReplyDelete
  9. pls do provide me a version of DDIK5 version for corbypro...pls its urngent

    ReplyDelete
  10. http://www.4shared.com/file/uVx5NOEf/B5310DDIK5.html

    ReplyDelete
  11. i am here at Phillipines.. what version should i use?

    ReplyDelete
  12. you can check your software version and csc version through *#1234#

    eg : B2310 DDJD2

    DD showing the country
    J 2010
    D April


    DX for Indonesia, Malaysia, Philippines, Singapore, Vietnam

    this is the right version for you B5310DXJF3

    ReplyDelete
  13. i really like this post it's a really very helpful useful tutorial and i tried it myself
    and my great thanks to you for illustrating that.
    but i want to ask about something if it's possible or not, i spent my last 2 months searching about if it's possible to make my corby pro run on the great android OS i really like the idea and it'll be so much fun even if i managed to run it on android 1.5, and if it is possible how can that be done is it by replacing the whole original OS of the phone or with a boot loader like the samsung jet and let it run from the sdcard. and i'll be glad if anyone answered me about that also i'll put my e-mails if someone wanted to contact me
    e-mails :
    MegaByte_2400@att.net
    MegaByte_2400@live.ca

    ReplyDelete
  14. i like the post .. i like to intall jar files directly . but i have 1 more doubt... in my Corby pro, it showing that the total phone memory is nearly 20 mb only.. i cannot able to see or use the remaining memory.. is the fireware update solve my problem?

    ReplyDelete
  15. I'm in India. can u help me by giving link for the firmware B5310DDJD2..

    ReplyDelete
  16. yet now that firmware is not leaked...you can upgrade it through any Samsung service center

    ReplyDelete
  17. I Found This Piece Of Info I hope You like it :)
    Firmware Explanation
    B5130 = Model
    DD = Region
    I = Year
    K = Month
    5 = Version

    Region codes:

    BD Cyprus, Greece
    CP Finland
    DB Vietnam
    DC Thailand
    DD India
    DT Australia
    DX Indonesia, Malaysia, Philippines, Singapore, Vietnam
    DZ Malaysia, Singapore
    JA South Africa
    JC Algeria, Morocco, Nigeria, South Africa, Tunisia
    JP Arabic
    JR Arabic
    JV Algeria, Egypt, Iran, Iraq, Kuwait, Morocco, Nigeria, Oman, Pakistan, Saudi Arabia, South Africa, Syria, Tunisia, Turkey
    MT Switzerland
    XA Austria, France, Germany, Italy, Netherlands, Switzerland, United Kingdom
    XB Denmark, Norway, Sweden
    XC Portugal, Spain
    XD Croatia, Czech, Hungary, Slovakia
    XE Bulgaria, Estonia, Kazakhstan, Latvia, Lithuania, Russia, Ukraine
    XF Bulgaria, Croatia, Romania
    XX Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
    ZC China, Hong Kong
    ZH Hong Kong
    ZT Taiwan


    Release year codes:

    A*2001
    B*2002
    C*2003
    D*2004
    E*2005
    F*2006
    G*2007
    H*2008
    I*2009
    J*2010

    Release month codes:

    A*January
    B*February
    C*March
    D*April
    E*May
    F*June
    G*July
    H*August
    I*September
    J*October
    K*November
    L*December

    ReplyDelete
  18. how to flash android on corby pro??

    ReplyDelete
  19. i installed B5310JVJA3 on my corby pro but i still can't read arabic messages :S

    ReplyDelete
  20. @Abdul Azeez

    Android you can't install on corby pro model,
    it require hardware support also...

    ReplyDelete
  21. Samsung Corby pro wonderful phone for youngsters, this phone have so many qualities.

    ReplyDelete
  22. Anyone have the link for this firmware?

    B5310DXJF3

    ReplyDelete
  23. how do i upload software from my system to my pro..?
    generally it gets downloaded into the games+ folder but i'm not able to download it from my system :(

    ReplyDelete
  24. how do i install flash player for samsung pro likely using this method? is it possible?

    ReplyDelete
  25. hello sir i am using corbypro b5310 in india . i started downloading jar files and sucessfully installed on my phone. but thoose installed applications are directly being placed in games & applications icon. so can i put thoose installed apps in main menu as an icon. pls help me.......

    ReplyDelete
  26. i didnt find the boot folder in B5310JVJB2.what can i do????

    ReplyDelete
  27. what should i flash for greece? which is the latest compatible? thank yu :)

    ReplyDelete
  28. Hi there,
    I'm from bangladesh and my phone shows

    B5310DXIKA

    B5310OLBJC2

    i don't know if the firmware and software version are same or not.

    Please tell be what does the 'A' stand for in B5310DXIKA
    And if there's any upgrade of this version, which version should I go for?

    ReplyDelete
  29. ı need JVJD2
    link plss
    not working camera

    ReplyDelete
  30. This site was extremely useful! I have been looking all over the net for an update, and I'm glad I ran into this site :).
    I had a question though - while the corby pro is amazing in most of its aspects, I have a huuge problem in the music player. I have an 4gb memory card, and it's loaded with songs. Now firstly, there is no search feature. That can still be accepted. But in my corby pro, the music file list goes to the top, after I navigate into a sub category and then hit return. Say I picked a song starting with the letter "n", and then if I hit return, it starts off at "a". Is there anything I can do to fix it? Any firmware that fixes it? I tried a couple of the firmwares, none of them worked.

    Thanks!

    ReplyDelete
  31. Hello There! i'm from brazil and my corby pro have a firmware that is from a thing called "3" and the apps are from this thing too... but i dont like this configuration and all "3" related apps doesn't work because this thing "3" doesn't exists anymore or something... Anyway! i want my corby pro with a SAMSUNG ORIGINAL FIRMWARE not those trash firmwares >.<

    can anybody help me please? Thanks! \o\

    ReplyDelete
  32. any new firnware for b5310ddik5????????????????????/

    ReplyDelete
  33. @^

    Ofcourse B5310 DDIK5 model is described in above comments..
    latest firmwares are B5310 DDJD2...etc

    ReplyDelete
  34. hi i m samsung corby pro user...

    plz reply me quickly to my ques... plzz

    i was thinking that latest firmware for corby pro has good apps and features but its keypad is of french i.e. awert something like that....

    so i was thinking that i if take its apps file and use other files of other firmware then will it work???

    or is there any other firmware which has qwerty and call recorder and ib built dic. and live TV. like features.. and any firmware has live tv feature??
    plz reply quickly ...

    plz reply on it if possible . . .

    aakash.best@gmail.com

    ReplyDelete
  35. i forgot to mention above that i belong to india..
    but i will install any firmware.. if it has qwerty and features like dictionary... call recorder and live tv(optional)

    thnxx

    ReplyDelete
  36. pls can u tell me how to install themes in samsung corby pro pls pls pls pls

    ReplyDelete
  37. @akash garg

    Live tv i' m also trying to add...but not yet
    i' m using B5310 DDJD2, it has built-in dictionary, qwerty, call recorder...etc

    And DDJD2 -> DD represent Indian version... you can check the above list for identifying the version codes.!!

    ReplyDelete
  38. does anybody have a download link for the DDJD2 firmware?
    i don't trust the local service centre...

    ReplyDelete
  39. any other firmware with a built in dictionary will do too...preferably for India...

    ReplyDelete
  40. @Tapan

    You can get it from Samsung service center.

    ReplyDelete
  41. Por favor necesito ayuda... flashee mi corby pro con la version B5310XCIL2... Todo salio a la perfeccion menos la camara la cual me presenta error al abrirla.... como puedo solucionar eso. Gracias. cualquier informacion me sirve

    @licjols

    ReplyDelete
  42. Hey...!
    I am having a little problem with the qwerty..!
    I downloaded b5310ddik5 from the link posted above in the comments....!
    But there was no csc and psf file in it....!
    Without the csc file, no text came upon my corby's screen....!
    so i used the csc and psf files of b5310XXJJ1...!
    Now the text loads up in the screen...!
    But whenever i access my widgets menu,it restarts...!

    ReplyDelete
  43. I wrongly uploaded S3650 firmware in my corby pro it is not starting now.....i have also tried with samsung corby pro firmware provided in this site...but i cannot select APPS and Rsrc1 file in Multiloader am getting "cannot load Rsc1 binary".........PLEASE HELP ME GUYS asap
    ramece88@gmail.com

    ReplyDelete
  44. This comment has been removed by the author.

    ReplyDelete
  45. hey i want to flash my Corby Mate GT-B3313..!! how can i do dat?
    plz can any1 help.>??

    ReplyDelete
  46. AT present which is the latest firmware for corby pro in india (original One)given by the company ??

    ReplyDelete
  47. B5310XXJF1 or B5310DDIK5 which one's the latest?

    ReplyDelete
  48. Hi, i'm in INDIA nd i upgrated my Corby Pro to B5310XXJF1 firmware bt d problem is my PRO taking reset in stand-by mode. You can say 7-8 times a day.
    Plz help wat shd i do !!!

    ReplyDelete
  49. Hi, I went through this tutorial and I recieved an error during the "download" part. My phone turned off and will not turn on now. Can I fix this? or is my phone completely useless now?

    Any help is greatly appreciated.
    Thanks.

    ReplyDelete
  50. Any caution symbol is displaying...
    Contact customer care..may be you tick master reset

    ReplyDelete
  51. thanks for a reply. when using the program "multiloader" I ticked the boxes for 'full download' and 'master rom' exactly as a tutorial told me to do. when there was an error, I ticked only 'Boot change'. after that, the phone powered off and can't power on again. Can't go in "Download" mode, nothing happens when plugged into a pc.

    ReplyDelete
  52. Hi Toby,

    In this tutorial; didn't mention to tick "master-rom"...

    ReplyDelete
  53. Damn, my mistake. Don't know why I ticked Master-rom if it's not in the tutorial.

    So is possible to save my phone?
    I'd like to go through any means of repair before i just throw it in the bin.
    Thanks again everybody.

    ReplyDelete
  54. Hi Toby,

    If your phone still have warranty; contact Samsung care they will give you latest version OS and change your phone hardware if necessary...

    ReplyDelete
  55. my phone's touch response became erratic and finally stopped working... could flashing be useful?

    ReplyDelete
  56. Hi, If the problem is with the software or the device driver; you can solve using flashing, bcoz it will reinstall the operating system; but if the error is due to the touch sensors or hardware components you should contact samsung service..

    ReplyDelete
  57. Hi i'm from bangladesh...my samsung corby pro's firmware version is B5310DDIK5 ...can any1 suggest me a compatible firmware for bangladesh....

    ReplyDelete
  58. Hi,

    What is special in Bangladesh edition?
    You can use B5310DDJD2; Its come with build in dictionary, call record, you can install java apps directly...

    ReplyDelete
  59. what firmware do u suggest for my corby pro in nidia?
    pls refer me the link too...

    ReplyDelete
  60. My touchscreens not working in corby pro.. i tried resettng it to factory setting but no help...what could be the issue? my firware is sw ver B5310DDIK5
    csc ver B5310ODDIK5.. can anyone help me?

    ReplyDelete
  61. I did all the needed as u said.But in multi loader when i click on port search ,the DOwnload button does not get enabled.WHy sO?also,after removing sim and memory card ,the pc cant dtect my phone..COuld this be a problem?Can anybody Help,please?

    ReplyDelete
  62. Thnks a lot man, I was trying out different things and I messed my phone up. With your instructions I was able to restore it.

    ReplyDelete
  63. pls give the link for B5310DDJD2

    ReplyDelete
  64. hey this post is very helpfull, but i would like to what is the latest firmare update for samsung corby pro please

    ReplyDelete
  65. http://dc342.4shared.com/download/eSTcDn-k/B5310DDJD2.zip?tsid=20111108-161657-87d4ca41

    ReplyDelete
  66. This comment has been removed by the author.

    ReplyDelete
  67. Hi, I am using Corby Pro for 18 months now and suddenly my Corby pro is heating to the extent that it feels it will burst!!! After some research I found out that flashing the Corby phone with the latest firmware will resolve the issue, but when I connect my phone to the pc kies does not detect it at all, no matter what I do, I tried removing antivirus but to no use, on my phone it shows "connected" message but nothing happens in the pc. Can anyone help me with it?? please!! ALTERNATIVELY if anyone know a method to flash the corby pro without using the usb chord would also be great (To put it another way, can I do the flashing with bluetooth instead of usb connection???). Kindly anyone please help me :(

    ReplyDelete
  68. i have installed b5310ddik5 in my phone this does support camera but does not support 3g in india,so i have installed b5310xxjf1 in this firmware camera is working but 3g cannot be activated
    what should i do now???
    plz give me the link for b5310ddjd2 full version(the above link doesnot contain csc.. files)
    plz help me

    ReplyDelete
  69. where will the camera and 3g settings belong to in the firmware files??? ie in (factory fs,shpapp,rsrc1,rsrc2)

    ReplyDelete
  70. where can i get the development kit of corby pro??

    ReplyDelete
  71. hy i have a samsung corby s 3650 i just try a resoft but now is not open help me

    ReplyDelete
  72. i had download B5310DXJG2 but there is no csc file then i download CSC_B5310_India.csc and flash my corby pro. but mobile doesnot on just restart several times, can i download B5310DXJG2 firmware with csc file.
    thanks

    ReplyDelete
    Replies
    1. Please share CSC_B5310_India.csc file. My mail id is manjupspl@gmail.com...Thanks

      Delete
  73. Pls give link for B5310DDJD2. The above Link(http://dc342.4shared.com/download/eSTcDn-k/B5310DDJD2.zip?tsid=20111108-161657-87d4ca41) has no file.

    thanks in advance

    ReplyDelete
  74. hola soy de Bolivia, hay algún firmware actualizado de corby pro GT-B5310 para mi país, ya intente con B5310XCIL2 pero me da error en la cámara. necesito su ayuda y gracias de antemano.

    ReplyDelete
  75. how to download & install b5310ddkc1 flash file...????

    ReplyDelete
  76. please help me with download link for B5310JPJA1

    ReplyDelete
  77. is b5310ddjd2 the latest version of b5310ddik5 nd if u have some link for that....

    ReplyDelete
  78. I am from Delhi(India) and I have samsung corby pro (b5310). it shows "camera failed..". Please help me to remove this error. Please mail me the answer or post the answer Here..
    My mail id is "100vicky001@gmail.com"

    Thanks

    ReplyDelete
  79. I flashed my phone as per the instructions but after the flash when my phone rebooted it paused at a point and now whenever Iam trying to reboot, it is getting stuck at the same point. What can I do now to restore it.

    ReplyDelete
  80. need this very bad CSC_B5310_India.csc

    ReplyDelete

techthesaurus on Facebook